Posts tagged Nailer

Bostitch N66C1 11/4inch to 21/2inch Coil Siding Nailer

0
1 year ago
by boss in
Bostitch
N66C-1
Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a magnesium housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.


The Bostitch N66C-1
Coil Siding Nailer
At a Glance:
  • 515 in./lbs. of driving power
  • Adjustable nail depth
  • Lightweight, durable magnesium housing
  • Tool-free adjustable exhaust



All-day siding jobs are easier on your hands thanks to lightweight magnesium housing. View larger.


Accepts both wire-weld and plastic-inserted coil nails from 1.25 to 2.5. View larger.
Works with a Variety of Siding Materials, from Soft Wood to Steel
Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use
Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with magnesium, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite. The N66C-1 stores in its included protective carrying case when not in use.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Siding nailer and carrying case.


....read more

Average Customer Rating

  0 out of 5
$399.00
$245.00

Bostitch MCN150 StrapShot Metal Connector Nailer

0
1 year ago
by boss in
Bostitch
MCN150
Today’s homes are stronger than ever. More knowledgeable homeowners, natural disasters, and stricter building codes have led the industry to adopt better ways of building houses. One important result of this has been the massive rise in the use of metal connectors. These metal connectors, whether it is in the form of a hurricane tie, joist hanger, or stud plate tie are used to strengthen the weaker joint areas of a home. Their popularity has given rise to a new necessity on the jobsite, the nailer to attach all of these metal connectors.

The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) is the perfect tool for all types of metal connectors. Its exposed nail tip places the fastener point directly into connector holes for a faster, more precise application. It has a built in safety that prevents the tool from firing when not placed properly into the connector hole. The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) drives 1-1/2-inch, 35 degree Paper Tape Metal Connector Nails to secure any type of metal connector plate. These nails come specially hardened to ensure that if there is a misfire it can still drive through the metal connector plate safely.

One of the features that set the Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) apart from similar nailers is its size. Its compact design fits easily into hard to reach spaces including 12 inches on center studs (MCN150 only 10-1/2 inches tall). The tool is up to 50% lighter than competitive models for reduced fatigue and added maneuverability. The in line magazine also helps maneuverability by fitting into corners easily. Its low nail lockout feature prevents jams by preventing cycling with less than 5 nails for added safety. The tool also comes with hardened steel wear guards to protect the tool and adjustable exhaust to conveniently direct air away from the user. Finally, Bostitch has included a carrying case and our exclusive 7-Year Limited Warranty. ....read more

Average Customer Rating

  0 out of 5
$259.00
$181.00

Bostitch BT1855K 18Gauge Brad Nailer

0
1 year ago
by boss in
Bostitch
BT1855K
18 gauge brad nailer kit. Drive 18 gauge brads from 5/8'' to 2 1/8''. Features: Oil free operation, selectable trigger system, low nail lockout, belt hook, ultra quiet rear exhause, dial a depth control. Kit includes: Brad nailer, 1/4'' swivel fitting, 1000 2'' brads, carrying case, and belt hook. ....read more

Average Customer Rating

  0 out of 5
$99.00
$72.49
Go to Top